Re: Problem with CU-SEEME on Mac

Joseph Kahan (jkahan@phoenix.phoenix.net)
Fri, 5 May 1995 10:08:23 -0500 (CDT)


Mark,

First of all, it sounds like you are having an extension problem when you
add the Videospigot extension to your already existing Screenplay
driver. Your Mac is confused. Try taking out your Screenplay
extension(s), replacing them with the Videospigot extension, restarting, and
running your Screenplay application. If you can receive video from your
camera with the Spigot extension, then you are in business. If you
can't, you probably have a video extension and board that CU-SeeMe won't
recognize. That is why CU comes up in an Audio only mode.

Best of Luck,

Joe

On Fri, 5 May 1995, Mark S. Fox wrote:

> We have tried running CU-seeme on the following configuration:
>
> Mac Quadra 800, MacOS 7.5
> Quicktime v2.0
> Videospigot II Tape, Screenplay II v1.0
> CU-SeeMe.68k.HI.0.80b2
>
> When we run CU-seeme, only the audio window appears, no video window.
>
> When we run Screenplay alone, a video window appears showing what our
> camera points at.
>
> When we put VDIG 1.5b18 into the extensions file, the machine will not boot.
>
> Can anyone out there tell us what we are doing wrong?
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> Mark S. Fox
> Professor of Industrial Eng. tel: +1-416-978-6823
> Department of Industrial Eng. fax: +1-416-971-2479
> University of Toronto email: msf@ie.utoronto.ca
> 4 Taddle Creek Road http://www.ie.utoronto.ca/EIL/eil.html
> Toronto, Ontario M5S 1A4 CANADA
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++