Video Blaster se100 Works for me

Dale Littlejohn (parts@ix.netcom.com)
Thu, 26 Oct 1995 07:02:18 -0700


Just thought I would try to share some info about getting
this se100 to work first I will describe my system then some hints
486sx66 with 8meg win95 provider netcom with 28k modem
At first I had a lot of error msgs. until I started reading
ALL of the text from cornell Including the mac info <-- some win info
here and discovered that I didn't install ALL the drivers that cuseeme
wanted. Once I installed the rest of the drivers. I could transmit fine
then I DISCOVERED KINGFISHER.CMS.SHU.AC.UK THIS IS A REFLECTOR IN THE
UK THAT SENDS YOU YOUR OWN TRANSMISSION.
USING THIS REFLECTOR I DISCOVERED THAT MY HIGH END CAMCORDER WOULD ONLY
GIVE PARTIAL TRANSMISSIONS. sO THEN I TRIED A PINHOLE B/W CAMERA WITH
FEWER LINES OF RESOLUTION AND FOUND THAT MY TRANSMISSION RATE WAS MUCH
FASTER. OOps sorry bout the caps.
Also found that at 800x600 I was NOT getting all the info in my own
window 600x480 gives me ALL the controls in my own window .
Hope this helps someone---GOOD LUCK
p.s. also found that a brighter setting seems to speed up fps and kbps
rates.
Please direct any hints or comments to parts@ix.netcom.com

c u sometime,
Dale